MonitorAudioから、新Goldシリーズ登場！！

海外ニュース速報 [World] 新製品速報

Gold 100

So well realised is the Gold 100, it’s the only stand mounting speaker of the series. The combination of 6½” (165 mm) C-CAM mid/bass driver, MPD high-frequency transducer and rear-facing HiVe II port in a compact, elegant cabinet makes this two-way loudspeaker sound far bigger than it is – it’s composed, adaptable and capable of greater bass presence than seems feasible.

Above all, it’s an accurate and informative listen, able to bring the best from its partnering electronics and the music you’re listening to. Small, in this instance, is remarkably beautiful.

Key Features

Two-way, rear ported cabinet configuration featuring HiVe II port technology – improved transient response and tighter bass, due to smoother air-flow
MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
61/2″ bass/mid-range driver, featuring:
– RDT II Cone technology – specially developed sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
– DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
Dedicated fixing points to bolt and combine with the Monitor Audio STAND – for best performance returns

System Format
2-way

Frequency Response (-6 dB)
40 Hz – 50 kHz

Sensitivity (1W@1M)
86 dB

Nominal Impedance
4 Ohms

Minimum Impedance
2.8 Ohms @ 3.4 kHz

Maximum SPL
110 dBA (Pair)

Power Handling (RMS)
120 W

Recommended Amplifier Requirements
60 – 120 W

Bass Alignment
Bass Reflex
HiVe II port system

Crossover Frequency
2.5 kHz

Drive Unit Complement
1 x 61/2″ RDT II long-throw bass driver
1 x MPD high-frequency transducer

External Dimensions (Including Grille and Terminals (H x W x D))
360 x 195 x 330.6 mm (143/16 x 711/16 x 13″)

External Dimensions (including Outrigger Feet and Spikes (H x W x D))
N/A

Weight (each)
9.12 kg (20 lb 2 oz)

Gold200

A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½” (165 mm) RDT II bass drivers beneath a 2½” (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.

All but the largest rooms will benefit from Gold 200’s remarkably tight and textured bass response, deftly informative mid-range and smooth high-frequency attack. Regardless of volume or your listening position, Gold 200’s powers of communication will move you.

Key Features

MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
Dual 61/2″ bespoke bass drivers, featuring:
– RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
– DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space

System Format
3-way

Frequency Response (-6 dB)
35 Hz – 50 kHz

Sensitivity (1W@1M)
88 dB

Nominal Impedance
4 Ohms

Minimum Impedance
3.4 Ohms @ 1 kHz

Maximum SPL
114 dBA (Pair)

Power Handling (RMS)
200 W

Recommended Amplifier Requirements
80 – 200 W

Bass Alignment
Bass Reflex
Dual HiVe II port system

Crossover Frequency
L.F/ M.F: 650 Hz
M.F/ H.F: 3.5 kHz

Drive Unit Complement
2 x 61/2″ RDT II long-throw bass driver
1 x 21/2″ C-CAM mid-range driver
1 x MPD high-frequency transducer

External Dimensions (Including Grille and Terminals (H x W x D))
950 x 195 x 330.6 mm (373/8 x 711/16 x 13″)

External Dimensions (including Outrigger Feet and Spikes (H x W x D))
997 x 282.8 x 387.8 mm (391/4 x 111/8 x 151/4″)

Weight (each)
21.86 kg (48 lb 2 oz)

 

Gold300

Gold 300 is the pinnacle of the range. Its deceptively large cabinet houses a 2½” (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer above and a pair of 8″ (203 mm) RDT II bass drivers below, in a true three-way arrangement.

Also featuring a pair of rear-facing HiVe II ports delivering smooth airflow and ample bass reinforcement, Gold 300 is the ideal speaker for larger rooms. Its punch and dynamism are matched only by its subtlety and fidelity – Gold 300’s effortless authority, from a crisp 50 kHz at the top end to an earth-moving 30 Hz at the bottom, makes it perfect for any and all listening requirements.

Key Features

MPD high frequency transducer – articulate, extended high frequencies, yet supremely smooth
Dual 8″ bespoke bass drivers, featuring:
– RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
Custom-made, high-quality gold plated bi-wire terminals
Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space

Frequency Response (-6 dB)
30 Hz – 50 kHz

Sensitivity (1W@1M)
90 dB

Nominal Impedance
4 Ohms

Minimum Impedance
3.5 Ohms @ 1 kHz

Maximum SPL
117 dBA (Pair)

Power Handling (RMS)
250 W

Recommended Amplifier Requirements
100 – 250 W

Bass Alignment
Bass Reflex
Dual HiVe II port system

Crossover Frequency
L.F/ M.F: 650 Hz
M.F/ H.F: 3 kHz

Drive Unit Complement
2 x 8″ RDT II long-throw bass driver
1 x 21/2″ C-CAM mid-range driver
1 x MPD high-frequency transducer

External Dimensions (Including Grille and Terminals (H x W x D))
1000 x 240 x 360.6 mm (393/8 x 97/16 x 143/16″)

External Dimensions (including Outrigger Feet and Spikes (H x W x D))
1047 x 327.8 x 417.8 mm (411/4 x 127/8 x 167/16″)

Weight (each)
30.56 kg (67 lb 4 oz)